Call Now for Fast Service
(404) 924-7071
High-build warehouse epoxy, polyaspartic fast-cure coatings, food-grade urethane-cement, ESD/static-control, and novolac systems for the distribution centers and processing plants in Norcross's I-85 and Jimmy Carter Boulevard freight corridor. Southeast Commercial Services is a licensed, insured commercial and industrial floor coating contractor — no residential.
Tell us about your floor and facility — we typically reply within the hour (Mon–Fri).
Norcross is a working-freight town. It anchors the I-85 / Peachtree Industrial Boulevard / Jimmy Carter Boulevard cluster — metro Atlanta's third-largest warehouse-distribution hub, with roughly 46 million square feet of industrial space across the I-85/Norcross/Peachtree submarket. Behind the dock doors in parks like Northbelt Business Park, Gwinnett Commons, Plaza 85, and Veridian Business Park are the operations that live and die by their floors: distribution centers running around the clock, food and beverage processing lines under constant wash-down, and electronics and manufacturing plants where static and chemical exposure are daily realities. A slab that fails under forklift traffic or blisters under hot water isn't a cosmetic problem here — it's downtime.
Southeast Commercial Services specs each floor to the traffic, chemicals, wash-down, and static the area actually carries, mechanically grinds the slab, and installs to the manufacturer's data sheet — then phases the work around your shifts and shipping windows so the operation keeps moving. We've coated Gwinnett and metro Atlanta industrial floors for over 30 years, commercial and industrial only.
Western Gwinnett's industrial base concentrates exactly the facility types our resinous systems are built for. Warehouse, distribution, and logistics is the dominant sector here — the mid-bay and flex buildings off Jimmy Carter Boulevard and Peachtree Industrial Boulevard, with suites ranging from small flex units up to buildings well past a million square feet, all running forklift traffic, racking loads, and shipping schedules that don't pause. Layered alongside them is a notable concentration of food and beverage processing, contract food manufacturing, and packaging, plus light and general manufacturing, automotive, and the electronics and tech operations that spill over from the adjacent Peachtree Corners technology cluster.
Those buildings sit in named parks that are places on the map — Northbelt Business Park in a Norcross Opportunity Zone off Jimmy Carter Blvd, Gwinnett Commons, Plaza 85 Business Park, Veridian Business Park, and Peachtree Corporate Center off Beaver Ruin and Steve Reynolds — strung along the interchanges at Jimmy Carter Blvd, Indian Trail-Lilburn Rd, and Beaver Ruin Rd, with I-285 about four miles out. We coat the warehouse, processing, production, and wash-down floors these operations depend on — matching high-build epoxy, urethane-cement, ESD systems, polyaspartic, or novolac to what each area has to survive.
Commercial epoxy flooring in Norcross, GA is a seamless resinous floor system — high-build warehouse epoxy, polyaspartic fast-cure, food-grade urethane-cement, ESD/static-control, or novolac epoxy — installed over a mechanically prepped concrete slab to give distribution centers, processing plants, and manufacturing floors a hard, cleanable surface that survives forklift traffic, wash-down, chemicals, static, and thermal shock. In Norcross's I-85 / Peachtree Industrial / Jimmy Carter Boulevard freight corridor it's installed by Southeast Commercial Services, a licensed, insured commercial and industrial floor coating contractor — no residential.
The right system depends on the area: high-build epoxy or polyaspartic on warehouse and distribution floors, urethane-cement in food and beverage processing and wash-down zones, ESD flooring where electronics and sensitive components are handled, and novolac epoxy where chemical exposure is aggressive. Southeast diamond-grinds and moisture-tests the slab, then phases the install to return each area to service as fast as the system allows.
One facility rarely needs one floor. We match the resin system to what each warehouse, processing, and production area actually takes.
High-build epoxy engineered for forklift and pallet-jack traffic, point loads from racking, and the round-the-clock throughput of Norcross distribution centers off Jimmy Carter Blvd and PIB.
Fast-cure polyaspartic systems that return an aisle, dock, or work area to service the same day or overnight when a distribution operation can't stop for a slow-curing floor.
Urethane-cement (urethane mortar) for processing and packaging lines — built for daily wash-down, hot water and steam, thermal shock, and FDA/USDA-type hygiene, with integral cove and slope to drain.
Conductive and static-dissipative flooring for the electronics and tech operations in and around the Peachtree Corners cluster, where static has to be bled safely to ground.
Novolac epoxy for general-manufacturing, automotive, and chemical-exposure zones where aggressive solvents, acids, and fluids break down standard coatings.
Diamond-grind mechanical profiling, moisture testing, crack and joint repair, and moisture mitigation — the prep that decides whether any resinous floor actually lasts.
Coating a floor as part of a larger fit-out? These systems bundle with commercial & industrial painting, concrete polishing, and full facility programs under one contract. For the complete range of systems, start at our metro Atlanta commercial epoxy flooring hub.
Three decades of commercial and industrial floor coating, specified to the traffic, chemicals, wash-down, and static demands of a working freight corridor.
Across Norcross's I-85 and Jimmy Carter Blvd industrial corridor we coat:
Facility and plant managers keep us on the vendor list because the floor performs:
A resinous floor is only as good as its prep and its schedule. On every job we:
Racking loads, dock traffic, and wash-down all put a facility's floor under the kind of duty covered by OSHA's walking-working-surfaces standard (29 CFR 1910.22), which requires floor surfaces to be kept clean, orderly, and in a safe condition — a seamless, slip-rated resinous floor is one of the simplest ways to hold that line in a busy distribution or processing environment.
There is no flat rate. Cost is driven by the square footage, the resin system specified — a urethane-cement, novolac, or ESD floor costs more than a standard warehouse epoxy — the condition of the concrete, how much grinding, crack repair, and moisture mitigation the slab needs, and any after-hours or phased scheduling to keep a distribution operation running. We walk the facility, spec the system to how each area is actually used, and return a written per-square-foot quote you can compare against other bidders line for line.
Yes. Norcross sits in the I-85 / Peachtree Industrial Boulevard / Jimmy Carter Boulevard freight cluster — metro Atlanta's third-largest industrial submarket, with roughly 46 million square feet of warehouse and distribution space. The buildings in parks like Northbelt Business Park, Gwinnett Commons, Plaza 85, and Veridian Business Park run exactly the floors we coat: high-build warehouse epoxy, polyaspartic fast-cure coatings, urethane-cement for food and beverage processing, ESD/static-control floors for electronics, and novolac epoxy for chemical zones. Southeast Commercial Services works these Norcross facilities commercial and industrial only, from our Atlanta and Decatur offices.
Most Norcross distribution and warehouse floors take a high-build epoxy or polyaspartic system engineered for forklift and pallet-jack traffic, point loads from racking, and the throughput that can't stop for a slow-curing floor. Where downtime is the constraint, a polyaspartic fast-cure system returns an aisle or dock area to service the same day or overnight. For food and beverage processing lines in the corridor we spec urethane-cement instead, and for electronics and tech operations we use ESD/static-control flooring. We match the resin, thickness, and topcoat to how each area is actually used.
Food and beverage processing and packaging is a notable concentration in the Norcross corridor, and those environments need urethane-cement (urethane mortar) rather than standard epoxy. Urethane-cement handles daily wash-down, hot water and steam cleaning, thermal shock, and the organic acids and sanitizers a processing floor sees, while giving a seamless, hygienic surface that meets FDA/USDA-type sanitation expectations. We install it with integral cove base and slope to drain so the floor cleans out instead of holding water.
There is no flat rate. Cost is driven by the square footage, the resin system specified (a urethane-cement, novolac, or ESD floor costs more than a standard warehouse epoxy), the condition of the concrete, how much grinding, crack repair, and moisture mitigation the slab needs, and any after-hours or phased scheduling to keep a distribution operation running. We walk the facility, spec the system to how each area is used, and return a written per-square-foot quote you can compare against other bidders line for line.
Norcross is one stop on our metro Atlanta commercial flooring map. We coat the warehouse, processing, and manufacturing floors along the I-85 and Peachtree Industrial corridor and the neighboring Gwinnett and Northeast-metro business districts from the same Atlanta and Decatur crews.
Beyond Norcross we regularly coat facilities in adjacent Peachtree Corners and up I-85 in Duluth, along with Doraville and Tucker to the southwest. We also run dedicated epoxy flooring pages for nearby Tucker and Roswell. For the full range of epoxy, urethane-cement, ESD, polyaspartic, and novolac systems and the facilities we coat across the region, start at our metro Atlanta commercial epoxy flooring hub. Coating a floor as one line in a larger project? Bundle it with commercial & industrial painting or concrete polishing under one contract.
Tell us the facility type, rough square footage, and your timing. A Southeast Commercial Services team member will follow up to schedule a walkthrough — typically within the hour, Monday–Friday.