Call Now for Fast Service
(404) 924-7071
High-build warehouse epoxy, polyaspartic fast-cure coatings, food-grade urethane-cement, ESD/static-control, and novolac systems for the distribution centers and manufacturing plants along Duluth's Peachtree Industrial Boulevard, Buford Highway, and I-85 freight corridor in Gwinnett County. Southeast Commercial Services is a licensed, insured commercial and industrial floor coating contractor — no residential.
Tell us about your floor and facility — we typically reply within the hour (Mon–Fri).
Duluth is a working-freight town in northeastern Gwinnett County, sitting where Peachtree Industrial Boulevard meets Buford Highway, with I-85 a few miles southeast and Sugarloaf Parkway running east toward SR 316. Behind the dock doors along the Peachtree Industrial Boulevard warehouse-flex spine and the I-85 logistics corridor are the operations that live and die by their floors: distribution centers running around the clock, food-processing lines under constant wash-down, and electronics, precision-instrument, and medical-device plants where static and chemical exposure are daily realities. A slab that fails under forklift traffic or blisters under hot water isn't a cosmetic problem here — it's downtime.
Southeast Commercial Services specs each floor to the traffic, chemicals, wash-down, and static the area actually carries, mechanically grinds the slab, and installs to the manufacturer's data sheet — then phases the work around your shifts and shipping windows so the operation keeps moving. We've coated Gwinnett and metro Atlanta industrial floors for over 30 years, commercial and industrial only.
Northeastern Gwinnett's industrial base concentrates exactly the facility types our resinous systems are built for. Warehouse, distribution, and logistics is the dominant read here — the mid-bay and flex buildings strung along Peachtree Industrial Boulevard, Buford Highway, Pleasant Hill Road, and the I-85 corridor, all running forklift traffic, racking loads, and shipping schedules that don't pause. Layered alongside them, per Gwinnett's own target-industry mix, are advanced manufacturing (food processing, electronics, optical-fiber and precision-instrument production), health sciences including medical-device and pharma/biotech manufacturing and distribution, plus information-technology operations and corporate and professional services.
Those buildings sit in named districts and parks that are places on the map — the Peachtree Industrial Boulevard corridor through Duluth (the established warehouse/flex/light-industrial spine), the planned Sugarloaf Logistics Hub underway where SR 316 meets Sugarloaf Parkway, the Gwinnett 85 Logistics Center on the I-85 corridor, and Northbelt Business Park on the southwest-Gwinnett side with quick I-85 access — connected by Sugarloaf Parkway, Pleasant Hill Road, and Abbotts Bridge Road (SR 120). We coat the warehouse, processing, production, and wash-down floors these operations depend on — matching high-build epoxy, urethane-cement, ESD systems, seamless cleanable epoxy, polyaspartic, or novolac to what each area has to survive.
Commercial epoxy flooring in Duluth, GA is a seamless resinous floor system — high-build warehouse epoxy, polyaspartic fast-cure, food-grade urethane-cement, ESD/static-control, seamless cleanable epoxy, or novolac epoxy — installed over a mechanically prepped concrete slab to give distribution centers, processing plants, and manufacturing floors a hard, cleanable surface that survives forklift traffic, wash-down, chemicals, static, and thermal shock. In Duluth's Peachtree Industrial Boulevard / Buford Highway / I-85 freight corridor it's installed by Southeast Commercial Services, a licensed, insured commercial and industrial floor coating contractor — no residential.
The right system depends on the area: high-build epoxy or polyaspartic on warehouse and distribution floors, urethane-cement in food-processing and wash-down zones, ESD flooring where electronics and precision components are handled, seamless cleanable epoxy in medical-device and life-sciences production, and novolac epoxy where chemical exposure is aggressive. Southeast diamond-grinds and moisture-tests the slab, then phases the install to return each area to service as fast as the system allows.
One facility rarely needs one floor. We match the resin system to what each warehouse, processing, and production area actually takes.
High-build epoxy engineered for forklift and pallet-jack traffic, point loads from racking, and the round-the-clock throughput of Duluth distribution centers along Peachtree Industrial Blvd and the I-85 corridor.
Fast-cure polyaspartic systems that return an aisle, dock, or forklift lane to service the same day or overnight when a distribution operation can't stop for a slow-curing floor.
Durable line striping for racking aisles, forklift lanes, pedestrian walkways, and safety markings — laid out to keep a busy Duluth distribution floor organized and compliant.
Urethane-cement (urethane mortar) for processing, packaging, freezer, and cooler areas — built for daily wash-down, hot water and steam, thermal shock, and FDA/USDA-type hygiene, with integral cove and slope to drain.
Conductive and static-dissipative flooring for the electronics, optical-fiber, precision-instrument, and medical-device operations in Gwinnett's advanced-manufacturing mix, where static has to be bled safely to ground.
Seamless, cleanable, chemical-resistant epoxy for medical-device and life-sciences production, plus novolac epoxy for aggressive-chemical zones where solvents and acids break down standard coatings.
Diamond-grind mechanical profiling, moisture-vapor testing and mitigation on slab-on-grade Georgia warehouses, crack repair, and joint filling — the prep that decides whether any resinous floor actually lasts.
Coating a floor as part of a larger fit-out? These systems bundle with commercial & industrial painting, concrete polishing, and full facility programs under one contract. For the complete range of systems, start at our metro Atlanta commercial epoxy flooring hub.
Three decades of commercial and industrial floor coating, specified to the traffic, chemicals, wash-down, and static demands of a working freight corridor.
Across Duluth's Peachtree Industrial Blvd and I-85 industrial corridor we coat:
Facility and plant managers keep us on the vendor list because the floor performs:
A resinous floor is only as good as its prep and its schedule. On every job we:
Racking loads, dock traffic, and wash-down all put a facility's floor under the kind of duty covered by OSHA's walking-working-surfaces standard (29 CFR 1910.22), which requires floor surfaces to be kept clean, orderly, and in a safe condition — a seamless, slip-rated resinous floor is one of the simplest ways to hold that line in a busy distribution or processing environment.
There is no flat rate. Cost is driven by the square footage, the resin system specified — a urethane-cement, novolac, ESD, or seamless cleanable floor costs more than a standard warehouse epoxy — the condition of the concrete, how much grinding, crack repair, joint filling, and moisture-vapor mitigation the slab needs, and any after-hours or phased scheduling to keep a distribution operation running. We walk the facility, spec the system to how each area is actually used, and return a written per-square-foot quote you can compare against other bidders line for line.
Yes. Duluth sits in northeastern Gwinnett County at the intersection of Peachtree Industrial Boulevard and Buford Highway, with I-85 a few miles southeast — a genuine freight and distribution corridor. Along the Peachtree Industrial Boulevard warehouse-flex spine, the I-85 logistics corridor, and Sugarloaf Parkway, facilities run exactly the floors we coat: high-build warehouse epoxy, polyaspartic fast-cure coatings, urethane-cement for food-processing, ESD/static-control floors for electronics and precision manufacturing, seamless cleanable epoxy for medical-device and life-sciences production, and novolac epoxy for aggressive-chemical zones. Southeast Commercial Services works these Duluth facilities commercial and industrial only, from our Atlanta and Decatur offices.
Most Duluth distribution and warehouse floors take a high-build epoxy or polyaspartic system engineered for forklift and pallet-jack traffic, point loads from racking, and the throughput that can't stop for a slow-curing floor. Where downtime is the constraint, a polyaspartic fast-cure system returns an aisle, dock, or forklift lane to service the same day or overnight, and line striping lays out racking aisles, forklift lanes, and safety markings. For food-processing lines in the corridor we spec urethane-cement instead, and for electronics and precision manufacturing we use ESD/static-control flooring. We match the resin, thickness, and topcoat to how each area is actually used.
Food processing is one of the confirmed target sectors in the Duluth and greater Gwinnett industrial base, and those environments need urethane-cement (urethane mortar) rather than standard epoxy. Urethane-cement handles daily wash-down, hot water and steam cleaning, thermal shock at cooler and freezer thresholds, and the organic acids and sanitizers a processing floor sees, while giving a seamless, hygienic surface that meets FDA/USDA-type sanitation expectations. We install it with integral cove base and slope to drain so the floor cleans out instead of holding water.
Yes. Electronics, optical-fiber, precision-instrument, and medical-device manufacturing are confirmed sectors in the Gwinnett industrial mix, and those production environments need static to be bled safely to ground. We install conductive and static-dissipative ESD flooring that protects sensitive components, and where a production or life-sciences area also needs to stay clean and chemically resistant, we combine ESD performance with a seamless cleanable epoxy. The system is spec'd to the resistance range and cleanroom-adjacent hygiene the operation requires.
There is no flat rate. Cost is driven by the square footage, the resin system specified (a urethane-cement, novolac, ESD, or seamless cleanable floor costs more than a standard warehouse epoxy), the condition of the concrete, how much grinding, crack repair, joint filling, and moisture-vapor mitigation the slab needs, and any after-hours or phased scheduling to keep a distribution operation running. We walk the facility, spec the system to how each area is used, and return a written per-square-foot quote you can compare against other bidders line for line.
Duluth is one stop on our metro Atlanta commercial flooring map. We coat the warehouse, processing, and manufacturing floors along the Peachtree Industrial Boulevard and I-85 corridor and the neighboring Gwinnett business districts from the same Atlanta and Decatur crews.
Beyond Duluth we regularly coat facilities southwest along Peachtree Industrial Blvd and I-85 in Norcross and adjacent Peachtree Corners, north up the corridor in Suwanee, and east via Sugarloaf Parkway toward Lawrenceville — all in Gwinnett County. We also run dedicated epoxy flooring pages for nearby Norcross, Tucker, and Kennesaw. For the full range of epoxy, urethane-cement, ESD, polyaspartic, and novolac systems and the facilities we coat across the region, start at our metro Atlanta commercial epoxy flooring hub. Coating a floor as one line in a larger project? Bundle it with commercial & industrial painting or concrete polishing under one contract.
Tell us the facility type, rough square footage, and your timing. A Southeast Commercial Services team member will follow up to schedule a walkthrough — typically within the hour, Monday–Friday.