Call Now for Fast Service
(404) 924-7071
Chemical-, fuel-, and abrasion-resistant resinous floors for Marietta and Cobb County — novolac and high-build epoxy for aerospace, defense, and advanced manufacturing, ESD/static-control for electronics and precision assembly, urethane-cement for food and beverage, and warehouse epoxy for the I-75 distribution corridor. Southeast Commercial Services is a licensed, insured commercial and industrial floor coating contractor — no residential.
Tell us about your floor and facility — we typically reply within the hour (Mon–Fri).
Marietta is Cobb County's industrial engine, and it does more than one kind of work. The aerospace and defense manufacturing base near the Dobbins airfield in south Marietta puts jet fuel, hydraulic fluid, and solvents on high-abrasion machining, assembly, and MRO floors. The mid- and small-bay warehouse concentration along Industrial Park Drive, Allgood Road, and Cobb International Boulevard runs advanced-manufacturing and distribution operations. And the modern high-clear product along the I-75 corridor between Delk Road and South Marietta Parkway is built for logistics. Each of those floors has to survive something different, and a single warehouse coating was never engineered to cover all of it.
Southeast Commercial Services specs each floor to the loads, chemicals, and static requirements the area actually carries, mechanically preps the slab, and installs to the manufacturer's data sheet — then phases the work around your production and shipping windows so operations keep running. We've coated Cobb County facilities for over 30 years, commercial and industrial only.
Marietta runs three distinct industrial corridors, and our resinous systems are built for the facilities in all of them. Along the I-75 spine between Delk Road and South Marietta Parkway sits the newest, highest-clear distribution product — big-box warehouse and logistics floors that take constant forklift traffic, striping, and impact. The South Marietta and Dobbins-area corridor along Industrial Park Drive, Allgood Road, Cobb International Boulevard, and Airport Industrial Park Drive holds the county's largest concentration of mid- and small-bay warehouse and manufacturing space, sitting next to the aerospace and defense manufacturing sector.
North of the city, the Canton Road, Bells Ferry, and Cobb Parkway North areas run smaller flex and light-industrial buildings. Redevelopment through the Gateway Marietta CID along Franklin Gateway and Delk Road is bringing more of these buildings back into service. Across all of it we coat production, assembly, machining, MRO, wash-bay, and warehouse floors in Cobb County — matching novolac epoxy, ESD systems, urethane-cement, or warehouse epoxy to what each area has to survive.
Commercial epoxy flooring in Marietta, GA is a seamless resinous floor system — chemical- and fuel-resistant novolac or high-build epoxy, ESD/static-control, urethane-cement, warehouse epoxy, or polyaspartic — installed over a mechanically prepped concrete slab to give manufacturing, aerospace, food-and-beverage, and distribution facilities a hard, cleanable surface that survives fuel, hydraulic fluid, solvents, abrasion, thermal shock, and heavy forklift loads. In Marietta and Cobb County it's installed by Southeast Commercial Services, a licensed, insured commercial and industrial floor coating contractor — no residential.
The right system depends on the area: chemical- and fuel-resistant novolac or epoxy on aerospace, defense, and advanced-manufacturing floors, ESD flooring where electronics and precision components are assembled, urethane-cement in food-and-beverage wash-down zones, and high-build warehouse epoxy with striping (or polyaspartic where fast cure matters) in I-75 distribution space. Southeast diamond-grinds and moisture-tests the slab, then phases the install to return each area to service as fast as the system allows.
One facility rarely needs one floor. We match the resin system to what each production, machining, wash-bay, and distribution area actually takes.
High-build novolac and epoxy for aerospace, defense, and advanced-manufacturing floors exposed to jet fuel, hydraulic fluid, and aggressive solvents on high-abrasion machining, assembly, and MRO slabs.
Conductive and static-dissipative flooring for electronics and precision-assembly areas where sensitive components are handled and static has to be bled safely to ground.
Heavy-duty urethane-cement for food and beverage production and wash-down zones that see thermal shock, standing water, and constant washing and sanitation.
High-build warehouse epoxy with durable striping for the I-75 distribution corridor — engineered for constant forklift traffic, aisle layout, and impact.
Trowel-down epoxy mortar and broadcast-quartz systems for general and flex industrial floors that take heavy forklift, impact, and point loading.
Polyaspartic and MMA systems that return a production cell, machining bay, or warehouse aisle to service the same day or overnight when downtime is the real constraint.
Coating a floor as part of a larger fit-out? These systems bundle with commercial & industrial painting, concrete polishing, and full facility programs under one contract. For the complete range of systems, start at our metro Atlanta commercial epoxy flooring hub.
Three decades of commercial and industrial floor coating, specified to the loads, chemicals, and static demands of Cobb County's manufacturing and distribution base.
Across Marietta's three industrial corridors we coat:
Facility and plant managers keep us on the vendor list because the floor performs:
A resinous floor is only as good as its prep and its schedule. On every job we:
There is no flat rate. Cost is driven by the square footage, the resin system specified — a chemical-resistant novolac, ESD, or urethane-cement floor costs more than a standard warehouse epoxy — the condition of the concrete, how much grinding, crack repair, and moisture mitigation the slab needs, and any after-hours or phased scheduling. We walk the facility, spec the system to how each area is actually used, and return a written per-square-foot quote you can compare against other bidders line for line.
Yes. We coat commercial and industrial floors across Marietta and Cobb County — the aerospace and defense manufacturing base near the Dobbins airfield, the advanced-manufacturing and mid-bay warehouse concentration along Industrial Park Drive, Allgood Road, and Cobb International Boulevard, and the modern distribution product on the I-75 corridor between Delk Road and South Marietta Parkway. Southeast Commercial Services installs chemical- and fuel-resistant novolac and epoxy, ESD/static-control, urethane-cement, and warehouse epoxy systems, commercial and industrial only, from our Atlanta and Decatur offices.
It depends on what the floor has to survive. Aerospace, defense, and advanced-manufacturing floors that see hydraulic fluid, solvents, and fuel call for chemical- and fuel-resistant novolac or high-build epoxy; electronics and precision-assembly areas need ESD/static-dissipative flooring; food and beverage wash-down zones need urethane-cement that handles thermal shock and constant washing; and distribution and warehouse space along I-75 typically takes high-build warehouse epoxy with striping, or polyaspartic where fast cure is the priority. We spec the resin, thickness, and topcoat to the loads, chemicals, and static requirements each area actually carries.
Yes. Manufacturing and distribution operations in Marietta can't stop for a floor, so we phase the work area by area and run fast-cure polyaspartic or MMA systems where downtime is the constraint — returning a bay, cell, or aisle to service the same day or overnight. Proper flooring also keeps working and walking surfaces compliant with OSHA's general-industry walking-working-surface rules, which we plan around your production and shipping windows before we start.
There is no flat rate. Cost is driven by the square footage, the resin system specified (a chemical-resistant novolac, ESD, or urethane-cement floor costs more than a standard warehouse epoxy), the condition of the concrete, how much grinding, crack repair, and moisture mitigation the slab needs, and any after-hours or phased scheduling. We walk the facility, spec the system to how each area is used, and return a written per-square-foot quote you can compare line for line.
Marietta is one stop on our metro Atlanta commercial flooring map. We coat the aerospace, manufacturing, and distribution floors along the I-75 corridor and the neighboring Cobb County business districts — including Kennesaw, Smyrna, Austell, Mableton, and Acworth — from the same Atlanta and Decatur crews.
Coating a floor in a nearby epoxy city we already serve? See our pages for Roswell and Norcross. For the full range of epoxy, novolac, ESD, urethane-cement, and warehouse systems and the facilities we coat across the region, start at our metro Atlanta commercial epoxy flooring hub. Coating a floor as one line in a larger project? Bundle it with commercial & industrial painting or concrete polishing under one contract.
Tell us the facility type, rough square footage, and your timing. A Southeast Commercial Services team member will follow up to schedule a walkthrough — typically within the hour, Monday–Friday.